• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

FS: SB Acoustics SB23MFCL45-4 subwoofer driver (Australia only)

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
For sale is one (1) SB23MFCL45-4 (4 ohm version) subwoofer driver that was purchased Feb 2019. It's in excellent condition and has less than 10 hours of average use and will be supplied in the original packing at AU$75 plus postage. The DCR has been measured and is right on specification indicating no shorts or open circuits.

Full technical details of this driver can be found at SB Acoustics where a PDF can be downloaded:

8'' SB23MFCL45-4 :: SB Acoustics

The build quality of this driver is exceptional as one would expect from SB Acoustics. As this is a lowish 87.5dB SPL subwoofer driver, it requires a amplifier with high gain and due to low impedance and low Cms, it requires an amplifier with high 4 ohm stable power and high current capabilities.

This is suited to small vented box designs between 20 - 22 litres which gives and F3 between 32-34Hz and even though it's a 8" subwoofer driver, it will out perform many larger subwoofer drivers.

Australia buyers only and shipping would be via Australia Post. Please note that is also listed on ebay oz.
 

Attachments

  • SB23MFCL_fr.jpg
    SB23MFCL_fr.jpg
    239.3 KB · Views: 146
  • SB23MFCL_bk.jpg
    SB23MFCL_bk.jpg
    270 KB · Views: 147
  • sb23MFCL_side.jpg
    sb23MFCL_side.jpg
    210.5 KB · Views: 136
  • SB23MFCL_box.jpg
    SB23MFCL_box.jpg
    220.4 KB · Views: 137
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.