Sorry as I still have another doubt, the split power supply which use LM317 for +ve and LM337 for -ve rails constant current source has different current output, although I constructed them with 22Ohms current limit resistor, but I got ~ 46mA at +ve rail and ONLY ~ 16 mA at -ve rail. By calculation I shud get ~ 56mA from each rail.. why this happen ? :-( tot LM337 faulty, but still the same even replaced with new IC.. I measure the current by connecting 100 Ohms resistor ( serial to ammeter)
and shorted the output ( LM 337 / LM317 ) reference to ground.. thanks
and shorted the output ( LM 337 / LM317 ) reference to ground.. thanks
lets continue talk about issues in proper place ;
http://www.diyaudio.com/forums/analog-line-level/134316-poor-serbian-man-optical-volume-control.html
this article interface isn't so convenient as we are used to - in threads , where we can post images easily
http://www.diyaudio.com/forums/analog-line-level/134316-poor-serbian-man-optical-volume-control.html
this article interface isn't so convenient as we are used to - in threads , where we can post images easily
Optical Attenuators
Thanks for another wonderful article. Where else could anyone get that kind of information in such a perfect way of writing? I’ve a presentation next week, and I’m on the look for such info.
Thanks for another wonderful article. Where else could anyone get that kind of information in such a perfect way of writing? I’ve a presentation next week, and I’m on the look for such info.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.