Greetings!
I'd like to do some experimentation with a small (sub)woofer box. I've been looking around for a suitable program to do the calculations, and I ended up with the "bass" program (by K. Foellner) which does a quite fine job.
The shortcoming of this (and many other) programs is that it allows only one driver. Is there any program that can deal with 2 or 3 (identical) drivers ???
Herman
I'd like to do some experimentation with a small (sub)woofer box. I've been looking around for a suitable program to do the calculations, and I ended up with the "bass" program (by K. Foellner) which does a quite fine job.
The shortcoming of this (and many other) programs is that it allows only one driver. Is there any program that can deal with 2 or 3 (identical) drivers ???
Herman
Pass DIY Addict
Joined 2000
Paid Member
There are two programs that are pretty easy to use. One is <a href="http://www.danbbs.dk/~ko/ubmodel.htm">UNIBOX</a> and the other is <a href="http://www.linearteam.dk/">WinISD</a>. You need to have the Thiell/Small parameters for the specifici driver to use these programs. They are usually available from the manufacturer/retailer of the driver. If you can't find the T/S for some particular driver, then move on and find another driver.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.