Just want to thank the community on here as new amp has been working well and sounding amazing espythanks to @ItsAllInMyHead @chermann. Have included a pic and vid. Super happy onto the next project.
Attachments
I have built 2 ACAs but without the switch shown in the pic above. Sorry for a dumb question but how would I wire them both for Mono bridged output?
^ Not a dumb question at all. You'd wire them exactly as in that diagram. Just follow the "blue" line that runs from the output of Side A through the resistor and back to the input of Side B. You just won't have a switch and you can ignore the connections to the XLR etc. You don't even need two RCA jacks.
I know that's a pretty quick answer... and there must be something more that you need re: the "how", but I'm not sure what's unclear. Maybe sketch up what you're thinking or take a pic.
I know that's a pretty quick answer... and there must be something more that you need re: the "how", but I'm not sure what's unclear. Maybe sketch up what you're thinking or take a pic.