Specification
- Designed with Tripath TA3020 Audio Amplifier Driver
- 16 IRFB4020 pwer MOSFET in parallel
- 1800W in BTL mode or 600Wx2 in stereo mode
- High effeciency, no heat sink needed @ 200W output
- Thermal protection
- Over voltage protection
- ±40V to ±60V and 2 seperated 12V AC Power supply
- All high quality audio components
- Optimized design for high power audio amplifier
- 205mm x115mm x 45mm
- Designed with Tripath TA3020 Audio Amplifier Driver
- 16 IRFB4020 pwer MOSFET in parallel
- 1800W in BTL mode or 600Wx2 in stereo mode
- High effeciency, no heat sink needed @ 200W output
- Thermal protection
- Over voltage protection
- ±40V to ±60V and 2 seperated 12V AC Power supply
- All high quality audio components
- Optimized design for high power audio amplifier
- 205mm x115mm x 45mm
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
An externally hosted image should be here but it was not working when we last tested it.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.